Weld-On Points

G80 D Ring with Spring, dRS Type

Brand: H-LIFT
Weld on plain surfaces as a lifting point, or to be used as a fixed anchor points for spreader beam attachment.
Can also be used as an anchor point for load restraint applications.
DRS type is equipped with a spring which enables the D ring to stay in the desired position.
Quenched and tempered.
100% magnaflux crack detection.
Standard: EN1677
Material: Forged alloy steel
Proof load at 2.5 times of the working load limit.
Safety factor 4:1
Powder coated surface finish.

Item Code	WLL (ton)	A (mm)	B (mm)	D (mm)	M (mm)	N. Weight (kg)
DRSG80-01.12T	1.12	41	78.5	13	37	0.4
DRSG80-03.15T	3.15	45	94	17	42.5	0.69
DRSG80-05.3T	5.3	55	118	22	50	1.46
DRSG80-08T	8	70	141	26.5	66.5	2.5
DRSG80-10T	10	85	165	28	76	3.59
DRSG80-15T	15	97	188	34	90	5.79

Brand: H-LIFT
Weld on plain surfaces as a lifting point, or to be used as a fixed anchor points for spreader beam attachment.
Can also be used as an anchor point for load restraint applications.
Quenched and tempered.
100% magnaflux crack detection.
Standard: EN1677
Material: Forged alloy steel
Proof load at 2.5 times of the working load limit.
Safety factor 4:1
Powder coated surface finish.

Item Code	WLL (ton)	A (mm)	B (mm)	D (mm)	M (mm)	N. Weight (kg)
DRXG80-20T	20	149	282	46	125	15.42

Brand: YOKE
Designed with spring, stop at any angle without bolt
Pivots 180° side loading allowed.
Manufactured from alloy steel, quenched and tempered. Captive bolt with high WLL.
Manufactured and tested in accordance with EN1677-1.
Load rated parts are 100% magnaflux crack detected.
Proof tested to 2.5 times the WLL.
Fatigue rated to 1.5 times the WLL.
Design factor 5:1